1. Product Introduction
This product is a gas automatic window breaking escape device, which conforms to the National Standard 7258 and Department Standard JT/T1094 approved by the Ministry of Communications of China. It is a high-tech certified technology product with one switch button to control multiple broken window devices. Both the driver and the passenger can breaking the window through the one switch button in crisis situation. The product has the characteristics of one second broken window, waterproofing and fault self-test. It can be applied to passenger transport, trains, subways, high-speed rail and other means of transportation.
2. Product Parameter (specification)
Broken glass thickness
Single layer 5~15mm
Internal battery life
Applicable vehicle range
Public transport, passenger transport, train, subway, high-speed rail glass, etc.
More than 5 years
100mm * 71mm * 38mm
-40℃ - 85℃
Shenzhen, Hongkong , Shanghai , Beijing, Ningbo, any port of China
3. Product application and feature
Bus,Train,Subway,High-speed rail and other auto glass.The driver and the passengers can break the windows through the master switch.
1). This device consists of five parts: driver switch, window breaker, independent power supply system, passenger switch and complete vehicle wiring harness.
2). To achieve a driver and passengers to break the window with one switch botton , can break the tempered glass within 8mm thickness.
3). Waterproof level is IP66, fireproof level material is UL94_V0.
4). A full range of support for multiple devices at the same time to break the window, safe and reliable.
5). Indicator light reminder for convenient and quick inspection.
4. Product details
Device composition diagram
5. Product installation
A. Select the installation location: Install it within the height range of 1 m to 1.7 m above the floor surface of the vehicle. Use the drilling tool to arrange the wire hole in this range.
B. Clean the dust, grease and water on the window glass near the window breaker before installation. As shown in the figure.
C. Confirm the position of the window breaker wiring, then remove the 3M rubber protective film on the window breaker, attach the window breaker to the window glass, and then lock it with the tapping screws on both sides.as shown in the figure.
D. The driver's broken window switch is installed in the left front of the driver's driving position. This switch uses the vehicle's universal emergency switch. It does not need to open another hole, and directly puts the driver switch into the standard card slot. as shown in the figure.
Q1:Does the product material have flame retardant properties?
Yes, the shell of product is made of PC material, which can be fireproof with flame retardant properties, meets the vehicle interior configuration standards, and reduces the burning speed.
Q2:What certification does this product have?
Q3:Can you do the OEM/ODM for us?
A:We are warmly welcome OEM orders
Q4:Can passengers break the windows manually?
Q5:what payment ways do you accept?
A:We receive Paypal,Western union,Bank transfer(T/T),Alipay all for Option